Lightware UCX-4x2-HC30 User Manual

 UCX series – User's Manual 134


ç GET·<usb_port>.ActivePortDataRole

ç GET·/V1/MEDIA/USB/<usb_port>.ActivePortPowerRole
Set Port Power Role
ç SET·<usb-c_port>.PortPowerRoleSetting=<power_role>
EDID Management

ç 

ç 

ç <user_edid>.PreferredResolution
Emulating an EDID to an Input Port
ç <source>:<destination>)
Emulating an EDID to All Input Ports
ç <source>)
Copy an EDID to User Memory
ç <source>:<destination>)
Deleting an EDID from User Memory
ç <user_edid>)
Resetting the Emulated EDIDs
ç 

Set the DHCP State
ç <dhcp_status>
Change the IP Address (Static)
ç <IP_address>
Change the Subnet Mask (Static)
ç <netmask>
Change the Gateway Address (Static)
ç <gw_address>
Apply Network Settings
ç 
Setting the Hostname
ç <unique_name>
Network Security #new

ç SET·/V1/MEDIA/ETHERNET/<ethernet_port>.Enabled=<status>

ç GET·/V1/MANAGEMENT/NETWORK/SERVICES/<port>.Port

ç GET·/V1/MANAGEMENT/NETWORK/SERVICES/<port>.Enabled=<status>

ç 
Set Password for Authentication
ç <password>)
Enable Authentication
ç SET·/V1/MANAGEMENT/NETWORK/SERVICES/<port>.AuthenticationEnabled=<status>
ç 
Restart Network Services
ç ·<port>:restart()
#new
BAUD Rate Setting
ç <serial_port>.Baudrate=<baudrate>
Stop Bits Setting
ç <serial_port>.StopBits=<stopbits>

ç <serial_port>.DataBits
Parity Setting
ç <serial_port>.Parity=<parity>

ç <serial_port>





Lightware UCX-4x2-HC30 Specifications

General

Brand	Lightware
Model	UCX-4x2-HC30
Category	Switch
Language	English