Lightware UMX-TPS-TX140 - System Commands and Cleartext Login Protection

 UMX-TPS-TX100 series – User's Manual 102

System Commands


Command and Response
ç 
æ <product_name>
Example
ç 
æ 
Set the Device Label
ATTENTION!  The device label can be changed to a custom text in the Status
writable parameter is not the same as the ProductName parameter. #devicelabel
<product_name>_<serial_no>
Command and Response
ç <Custom_name>
æ <Custom_name>

Example
ç 
æ 

Command and Response
ç 
æ <serial_nr>
Example
ç 
æ 

Command and Response #firmwareversion
ç 
æ <firmware_version>
Example
ç 
æ 
Resetting the Device

Command and Response #reboot #reset #restart
ç 
æ 
Example
ç 
æ 
Restore the Factory Default Settings
#factorydefaults
ç 
æ 
Example
ç 
æ 
The device is restarted, current connections are terminated, and the default settings are restored. See the
complete list in the Factory Default Settings section.



