Lightware UMX-TPS-TX140

2. Product Overview UMX-TPS-TX100 series – User's Manual 22

Front Panel Buttons
INFO:  
#button #crosspoint #switch
Video Select Button
Desired video input can be selected by the Video Select button from the front panel. The selection
order of the inputs depends on the model as follows:
UMX-TPS-TX120:
VGA
HDMI
Autoselect
UMX-TPS-TX130:
VGA
HDMI
DVI-D
Autoselect
DVI-A
UMX-TPS-TX140:
VGA
HDMI
DP
DVI-D
Autoselect
DVI-A
WP-UMX-TPS-TX120-US:
VGA
HDMI
Autoselect
WP-UMX-TPS-TX130-US:
VGA
HDMI
DP
Autoselect
FP-UMX-TPS-TX130-MKM:
VGA
HDMI
DP
Autoselect
VIDEO
SELECT
Audio Select Button
Desired audio input can be selected by the Audio Select button from the front panel. The selection
order of the inputs depends on the model as follows:
UMX-TPS-TX120:
Analog audio Embedded digital audio
UMX-TPS-TX130:
Analog audio Embedded digital audio
UMX-TPS-TX140:
Audio1 Audio2 Embedded audio
WP-UMX-TPS-TX120-US:
Analog audio Embedded digital audio
WP-UMX-TPS-TX130-US:
Analog audio Embedded digital audio
FP-UMX-TPS-TX130-MKM:
Analog audio Embedded digital audio
INFO:  

audio, this source is skipped. #audio #analogaudio
Programmable Show Me Button
Action or an operation can be assigned to the Show Me button. “Show Me button pressed” is a
condition that can be selected in the Event Manager. See more details in the Event Manager
section.
AUDIO
SELECT
SHOW
ME



