Servicing 5
Inspection and maintenance every 3000 operating hours or every 2 years
Check secure fastening, condition
and function of lift mast, lift mast
chains, lift cylinders and end stops
e3861311
¾ Clean lift mast guides and chain.
¾ Check chain for condition and wear, espe-
cially at deflection pulleys .
¾ Check secure fastening of cha
in to chain
anchor.
¾ Replace damaged chains.
NOTE
Individual plastic links that are damaged or
missing do not impair function or service life.
¾ Check the condition and secure fastening
of the lift mast, guide surfaces and pul-
leys/rollers.
¾ Check the condition, secure fastening and
function of the end stops.
¾ Check the secure fastening of
the lift cylin-
ders.
¾ Check the secure positioning of the lock ring
of the piston rod fastening to the lift mast at
the top .
Check the tilt cylinder bearings for
wear
NOTE
The tilt cylinders are attac
hed on both sides in
spring elements.
Operating Instructions – 386 807 1001 EN – 03/2006 127
To Next Page
Loading...
