1 Introduction
Initial commissioning
Initial commissioning
¾ Operating and steering hydraulics (hy-
draulic system): Check oil level.
¾ Battery: Check condition, charge state,
level and density of acid
¾ Check braking system
¾ Check electrical system (lights, windscreen
wipers, horn, heating)
¾ Check the condition and secure positioning
of electric cables, cable connectors and
connections
¾ Check lifting system and attachments
¾ Check steering system
¾ Tighten wheel fastenings (at least every
100 hours)
6 Operating Instructions – 386 807 1001 EN – 03/2006
To Next Page
Loading...
