Introduction 1
Takeover of forklift truck
Takeover of forklift truck
Before the forklift truck leaves our works, it is
subject to a careful inspection to ensure that it
is in perfect condition and is received by you
complete with all equipment according to your
order. Your authorised dealer is also obliged
to perform another inspection and proper
handover.
To avoid subsequent complaints please be
so kind as to carefully check the condition
of the forklift truck and the completeness of
the equipment yourself and to confirm proper
handover/takeover vis-à-vis your authorised
dealer.
Linde is constantly engaged
in the further
development of its products
. We ask for
your understanding that fig
ures/diagrams
and technical data are subje
ct to technical
modification in terms of for
m, equipment and
know-how in the interest of p
rogress.
For this reason no claims can be asserted
on the basis of the following data, figures/di-
agrams and descriptions in this operating
manual .
Please address all queries and orders for
spare parts relating to your forklift truck only to
your authorised dealer , stating your mailing
address.
In the event of repairs only u
se genuine Linde
spare parts. This is the only
way to guarantee
that your forklift truck rem
ains in the same
technical state as at the tim
e of takeover.
This operating manual must not be repro-
duced, translated or made accessible to third
parties - including as excerpts - except with the
express written approval of the manufacturer .
With orders for parts please specify the
following along with the parts numbers:
Forklift truck type:
Production number /
Year of manufacture
For parts from the units: motor, lift mast,
variable hydraulic pump and drive axle the
production number of these units should also
be specified.
Lift mast number
Lift mast lift height
When taking over the forklift truck, this data
should be copied from the rating plates of the
units into this operating manual.
NOTE
F
or forklift trucks which leave our works
w
ithout a lift mast an additional stop screw
f
or speed restriction can be found under
t
he forwards/reversing accelerator pedal
(
two-pedal operation) or accelerator pedal
(
one-pedal operation . These have to be
r
emoved after attaching the lift mast. To do so,
r
elease hexagonal head screws and unscrew
a
long with hexagonal nuts (see also Driving
w
ithout lift mast).
Each forklift truck includes the following
technical documentation:
•op
erating manual for forklift truck
• EC Declaration of Conformity (manufac-
turer confirms that industrial truck complies
with requirements of EC Machinery Direc-
tive.)
• Regulations for proper usage of industrial
trucks according to their intended purpose
(VDMA - German Engineering Federation)
•Regi
stration document for the industrial
truc
k, provided on handover by your autho-
rise
d dealer.
Operating Instructions – 386 807 1001 EN – 03/2006 5
To Next Page
Loading...
