Operation 4
Special equipment
Heating
Switch on heating
e3861347
1
0
2
3
1
2
3
4
¾ Rotate switch (3).
The blower is switched on and the
re are three
air flow settings.
Operating elements
• Rotary knob (1) for setting vent positions for
windscreen defrosting
• Rotary knob (2) for temperature control
• Rotary switch ( 3 ) for setting blow
er
• Interior air vents (4)
Windscreen defrosting
¾ For maximum windscreen defrosting set the
• rotary knob (2) to the end position o
nthe
right
• rotary knob (1) to the windscreen defrosting
position (end position on the left)
• rotary switch (3) to setting level 3
• interior air vents (4) to open, louvr
es for-
wards.
For standard heating operation the f
ol-
lowing rules apply:
• Select the temperature using the rotary
knob (2) (end position on the left → cold /
end position on the right → hot)
• Use the blower switch (3) (setting level 1 to
3), air distribution vent (rotary knob (1)) and
interior air vents (4) to select the tempera-
ture / temperature distribution you require
Operating Instructions – 386 807 1001 EN – 03/2006 57
To Next Page
