Maintenance 5
Engine
d3931389
2
¾ Open the bonnet.
The coolant level in the viewing window (2)
should not be below the mark.
d3921408
3
¾ If necessary, top up
the coolant. To do this,
remove the filler ca
p (3) at the counter-
weight.
WARNING
The expansion tank is under
pressure! Risk of scalding due to
hot coolant.
Unscrew the filler cap slowly (3) and
only if the expansion tank is not hot.
¾ Twist the filler cap into position.
¾ Close the bonnet.
Changing coolant
The cooling system must be filled all-year-
round with a mixture of water and phosphate-
free, glycol-based coolant additive with anti-
corrosion additives to prevent the deposit of
lime scale and damage caused by frost and
corrosion, and to raise the boiling tempera-
ture.
Operating Instructions – 393 807 1001 EN – 08/2008 123
To Next Page
Loading...
