Linde H25D - Type Sheet H 25, as at 05;2008

6 Technical data
Type sheet H 25, as at 05/2008
Type sheet H 25, as at 05/2008
1 Identification
1.1
Manufacturer
Linde
1.2
Manufacturer’s model designation
H25D
1.3 Drive Diesel
1.4
Operation
Seated
1.5
Load capacity / Load Q[kg]
2500
1.6
Load centre of gravity c [mm]
500
1.8 Load distance
x [mm]
445
1.9 Wheelbase
y [mm]
1905
2 Weight
2.1
Tare weight kg
3870
2.2
Axle weight with front/rear load
kg
5670 / 700
2.3
Axle weight without front/rear load
kg
1930 / 1940
3 Wheels, chassis frame
3.1
Front/rear tyres: polyurethane, rubber
SE
3.2
Tyre size, front
27x10-12
1
3.3
Tyre size, rear
23x9-10
2
3.5
Wheels, number, front/rear (x = driven) 2x (4x)/2
3
3.6 Front track width
b10 [mm] 1008 (1204)
4
,
5
3.7
Track width, rear
b11 [mm]
932
4 Basic dimensions
4.1
Forward/backward fork tilt
α/β (°)
5.0/8.0
6
4.2
Lowered mast height h1 [mm]
2264
7
4.3
Free lift
h2 [mm]
150
1
Optional: 7.00-12 dual fitment (air/SE). Single tyres air 27x10-12 and SE 28x12.5-15.
2
Optional: air 23x9-10.
3
Bracketed value for dual fitment.
4
1042 mm with tyre size SE 28x12.5–15.
5
Bracketed value for dual fitment.
6
Lift height and equipment can change the backwards tilt.
7
With 150 mm free lift on standard lift mast.
204 Operating Instructions – 393 807 1001 EN – 08/2008