D9U001PPB-0101100/106
12.2 Service and repairs
WARNING!
All service revisions, safety and technical inspections or service interventions
must be executed only by a technician trained by L I N E T spol. s r.o. company.
► Diagrams, lists of product parts, descriptions or other information intended to help
the service personnel with the repair of product parts, repairable by the service
personnel only as implied by the manufacturer, are available upon demand at the
manufacturer.
The product is provided with the warranty period of 2 years on conditions that regular annual service
inspections are carried out.
For all medical equipment produced by the L I N E T spol. s r.o. company, the operator must ensure
regular technical safety inspections according to the Manufacturer’s recommendation, thus the in-
spections must take place at least 1x per year or after the carrying out of any repair of the medical
equipment or after any intervention regarding the electrical system of the medical equipment. The
details about the scope, parameters and procedures of the technical safety inspection are specified
in the service manual of the medical equipment.
In case the product is not functioning, please contact the product dealer in your country. In case of
any other problems, please contact (preferably in English) the manufacturer at:
L I N E T spol. s r.o.
Želevčice 5
274 01 Slaný
Czech Republic
Tel.: +420 312 576 111
Fax: +420 312 522 668
Service department: service@linetgroup.com
For repairs, please use only the original L I N E T spol. s r.o. spare parts and the services of trained
service technicians licensed to repair products of this type. Unprofessional repairs shall be consid-
ered as a substantial breach of the warranty terms and conditions and the manufacturer simultane-
ously does not bear any responsibility for any further possible damage to the product which might
result from unprofessional intervention.