LINET AVE2 - Maximum Bed Surface Position

D9U001PPB-010156/106
9.6.3 Maximum bed surface position
The leg rests can be positioned horizontally along the sides of the foot section. Due to this function,
one laying surface can be achieved together with the seat and back sections.
For positioning:
► Pull „Turning the
leg rest sideways“
control lever as on
the picture below
and with the same
hand position the
leg rest to straight
direction, alike as
the foot rest
► Then pull the
„Tilting of the leg
rest“ control lever
and with the same
hand position the
leg rest in the
horizontal position