D9U001PPB-0101 25/106
3.1 Mechanical safety
WARNING!
No objects that may collide with the bed (furniture, stands etc.) may be located
near it (20 cm minimum). Special caution must be taken when operating moving
parts of the bed. Damage of the bed or patient injury may occur as result of the
bed parts colliding with other objects!
WARNING!
The bed is not designed for mothers over 240 kg (527 lb).
WARNING!
Before the mother in labor accesses the bed, the castor brakes must be engaged.
Accessing the bed only from side of seat section
Additional Instructions for correct use:
► No objects that may collide with the bed (furniture, stands etc.) may be located near it
► Never enter the space under motor operated parts of bed (back, seat and leg rests)
► Before undertaking any resetting of the birthing bed check if no one is within reach of the
moving parts
► Before any resetting, check for kinked and/or tangled power cables
► After setting the bed in place, all brakes must be engaged so as to prevent unwanted
movement of the bed, e.g. during patient’s occupancy. When setting the bed all four castors
have to be in contact with the floor and the brakes engaged
To Next Page
Loading...
