D9U001PPB-010124/106
Additional Instructions for correct use:
► Leave the bed in the low position when the patient is unattended. This can reduce the
possibility of patient falls and the severity of any resultant injuries.
► Make sure to fix and set the accessories properly (tightening of handles etc.)
► Do not dismantle or execute unqualified repairs of motors, control unit, etc.
► The birthing bedAVE2 must not be used in medical facilities with fire or explosion risks caused
by air or in combination with nitrous oxide and anesthetics or cleaning agents.
► Construction modifications reserved!
► The bed must be equipotentially connected with other medical devices to prevent fire in
combination with flammable substances and anesthetics during minor surgical procedures
using high-frequency (HF) instruments.
► Never use other than original accessories. All original accessories are marked with an original
label containing the name and brand of the manufacturer, designation of the product and
a code including further information (serial number or batch ID and date of manufacture).
► Modifications to the birthing bed are forbidden.
► The birthing bed is intended only for use by medical professionals and for woman in
labor (locked siderails and headboard as handles or functions buttons on inner side of
siderails for her higher comfort).
► Bed maintenance cannot be performed while ME equipment is in use!
To Next Page
Loading...
Need help?
General
