D9U001PPB-0101 17/106
SEQUENCE OF INSTRUCTIONS
Step 1
• Cut the pockets with the user guide to the bed
open carefully and take them out. Then remove
the box
Step 2
• Cut the plastic bag open carefully; ideally
around the bottom edge of the pallet and
remove the polythene from the chair including
the bottom of the box
Step 3
• Cut the foil which holds the power supply cable
carefully; plug the cable in
• Then cut the band around the box containing
the bed equipment and remove the bar (if
contained in the package). It is recommended
to put the back of the bed in an upright position
(60°) in order to access the box easily.
• Take out all the equipment from the box item-
by-tem. Bowl if included in the packaging
To Next Page
Loading...
Need help?
General
