D9U001PPB-0101 39/106
WARNING!
During transport, pay attention to the leg rests, side rails, foot section and hand
grips to prevent hitting doors and other objects. Otherwise you can cause injury to
persons or damage to the device.
WARNING!
Observe the following security hints when transporting the bed:
► When crossing transversal obstacles, lower the rest area to the lowest position.
► Avoid crossing of cables
► During transport, the power cable must be fixed with the hook
► Be sure the castors are unlocked before transport (see section related to
adjustment of the castors and transport of the bed)
► Move the bed only on the floors with suitable surface.
When transporting the birthing bed (with/without the patient), the following instructions
must be observed:
1. Move the rest area of the bed to horizontal position, the handles being in active (upper)
position.
2. Move leg supports to horizontal position, thus constituting compact rest area together with the
mattress and avoiding leg support projection outside of the circumference of the bed.
3. Disconnect power cable, equipotential and other connections, thus avoiding their pulling out.
4. Use the handrail on the back section for transport of the bed.
5. When transporting the bed by one operator, activate the direction castor, otherwise, the
transport must be carried out by two operators.
6. During transport interruption, central brake must always be applied.
7. After the transport, connect the power cable and secure the bed with the central brake.
To Next Page
Loading...
Need help?
General
