D9U001PPB-010174/106
WARNING!
When positioning the delivery bed downwards, there is a risk of collision
between the empty bracket and the oxygen bottle bracket with the foot / legs of
the operating personnel. Risk of deterioration of the bed or injury to the patient,
staff or a third party!
WARNING!
Do not step on the plastic frame cover when handling the bed with an oxygen
bottle holder!
WARNING!
Before actively using the oxygen bottle holder, always check the correct
dimensions of the oxygen cylinder, including the top of the bottle. Larger
dimensions can collide with positioning bars!
WARNING!
When positioning the seat, the oxygen bottle holder also becomes mobile
WARNING!
When using an oxygen cylinder, always check the patient's movements on the
bed. There is a risk that the patient will cling to the oxygen bottle, thinking he
has caught the sides of the bed! Risk of deterioration of the bed or injury to the
patient, staff or a third party!
WARNING!
Never remove the holder and the oxygen bottle holder together
Installation procedure:
► Place the bracket on the right DIN rail (1) in the direction of the arrow (2). The bracket is
designed so that it cannot be mounted on the opposite bracket (left DIN rail).
► Then insert the oxygen bottle vertically into the holder (3)
1
2
3
Contrary procedure
► To remove the oxygen bottle holder, the procedure must be carried out in the reverse order to
placement on the delivery bed
To Next Page
Loading...
