D9U001PPB-0101 77/106
The baby plate is used to drop the new-born for
a short period of time. The umbilical cord is cut
when the new-born is placed on the baby plate
and then placed on the breast of his mother, or
on another table to perform some necessary
procedures. Then it can be used to expel the
placenta and control it.
If the baby plate is not used it must be removed
from the bed and stored in the roomti
PPB-074 Version with mattress
Procedure for mounting the baby plate on
the delivery bed
► When mounting the baby plate on the
delivery bed, the locking levers must be
moved to the unlocked position (in the
direction of the arrow). Then slide the
baby plate by the handles in the seat part
of the delivery bed and push it towards
the seat part (1) until you hear a click (2)!
1
► Then make sure the lock lever is in the
down position (2)
2
Procedure for dismounting the baby plate
from the delivery bed
► Remove the baby plate in the reverse
order of installation
► When removing the baby plate from the
delivery bed, the locking levers must be
moved to the unlocked position in the
direction of the arrow (1)
► Then slide the baby plate out of the
handles on the seat part of the bed
towards you (2)
1
2
To Next Page
Loading...
Need help?
General
