Project SERVICE MANUAL
Date
05-2017
69/84
6.4 Switching between kg/lb – EU or US screen settings
Multicare 2015 redesigned beds can not be switched between kg and lb.Weighing in kg is set by default. Switching
between kg/lb is only allowed on beds for the U.S. market.
To allow switching between kg and lb:
Open the second page of the service menu (Sensor Sensitivity 2).
Press the kg/lb button, which is crossed out by default (see picture below).
It is possible to switch between weighing in kg or lb.
US version
EU version
To Next Page
Loading...
Need help?
General
