Linkam Scientific Instruments THMS600 User Manual

31
Place the Silver Cover Lid (SCO) on top of the
silver heating block as shown in the opposite
picture. Make sure the gap in the SCO (1) is
aligned with the stem (2) of the Sample holder.
The gap in the SCO allows movement of the
Sample Holder when the XY manipulators are
used.
To improve temperature stability an optional
13mm glass window (W13G) (3) can be used to
cover the aperture hole of the SCO.
2
1
3
1

Linkam Scientific Instruments THMS600 Specifications

General

Brand	Linkam Scientific Instruments
Model	THMS600
Category	Laboratory Equipment
Language	English