Configuration Backup/Restore Screen
Backup/Restore to/from Local PC
Backup
Configuration
Once you have the access point working properly, you
should back up the settings to a file on your computer.
You can later restore the access point's settings from
this file, if necessary.
To create a backup file of the current settings, click
Backup.
If you don't have your browser set up to save
downloaded files automatically, locate where you want
to save the file, rename it if you like, and click Save.
Restore
Configuration
To restore settings from a backup file:
1.
Click Browse.
2.
Locate and select the previously saved backup
file.
3.
Click Restore.
Backup/Restore to/from TFTP server
Backup
Configuration
To create a backup file of the current settings:
1.
Enter the destination file name you plan to save
in TFTP server.
2.
Enter the IPv4 address for the TFTP server.
3.
Click Backup.
Restore
Configuration
To restore settings from a backup file:
1.
Enter the source file name stored in TFTP server.
2.
Enter the IPv4 address for the TFTP server.
3.
Click Restore.
75