Linksys LAPN300 User Manual

12. Click Start > Run ; type ‘‘cmd‘‘ and press Enter.
Enter “ secedit /refreshpolicy machine_policy” (This command may take a few minutes to take
effect.
Internet Authentication Service (RADIUS) Setup
1. Select Start > Programs > Administrative Tools > Internet Authentication Service.
2. Right-click on Clients, and select New Client.
Figure 65: Service Screen
3. Enter a name for the access point, click Next.
4. Enter the address or name of the wireless access point, and set the shared secret, as entered
on the Security Settings of the wireless access point.
5. Click Finish.
6. Right-click on
Remote Access Policies , select New Remote Access Policy .
7. Assuming you are using EAP-TLS, name the policy ‘‘eap-tls’’, and click Next.
99

Linksys LAPN300 Specifications

General

Color	multi, white
Wi-Fi Speed	300 gigabits per second
Frequency Band	2.4 ghz
QoS Traffic Prioritization	no
Wireless Standard	n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	rogue ap detection; ssid to vlan mapping; 802.1x supplicant
Ports	rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.08 pounds