Linksys LAPN300 User Manual

Basic Settings
Basic Settings provides the essential configuration for your wireless radio and SSID. You should be
able to set up your wireless network with these essential parameters configured. Advanced wireless
settings, such as Band Steering, Channel Bandwidth, etc., will be on Configuration > Wireless >
Advanced Settings screen.
Click Basic Settings on the
Wireless menu.
Figure16: Basic Settings Screen
Basic Wireless Settings
Enable Radio
Enable or disable the wireless radio.
Wireless Mode • G only - allow connection by 802.11G wireless
stations only.
• N only - allow connection by 802.11N wireless
stations only.
• B/G-Mixed - allow connection by 802.11B and G
wireless
stations only.
• B/G/N-Mixed (Default) - allow connections by
802.11N, 802.11B and 802.11G wireless stations.
Wireless Channel Select wireless channel of the radio.
If Auto is selected, the access point will select the best available
channel when device boots up.
If you experience lost connections and/or slow data transfers
experiment with manually setting different channels to see which is the
best.
27

Linksys LAPN300 Specifications

General

Color	multi, white
Wi-Fi Speed	300 gigabits per second
Frequency Band	2.4 ghz
QoS Traffic Prioritization	no
Wireless Standard	n
Data Encryption	yes
Encryption Type	other, wep, wpa, wpa2
Security Features	rogue ap detection; ssid to vlan mapping; 802.1x supplicant
Ports	rj-45
Bluetooth	no

Weight and Dimensions

Height	1.72 inches
Width	9.33 inches
Net Weight	1.08 pounds