DRAFT
© 2003 - 2005 Linksys, a Division of Cisco Systems Proprietary (See Copyright Notice on Page 2)
64
- If the *code is not to be followed by a phone
number, such as *73 to cancel call forwarding,
do not include it in this parameter. In that case,
simple add that *code in the dial plan and the
SPA will send INVITE *73@..... as usual when
user dials *73.
Notes:
1. These codes automatically appended to the dial-plan. It is therefore not necessary to explicitly include
them in dial-plan.
To Next Page
Loading...
