DRAFT
© 2003 - 2005 Linksys, a Division of Cisco Systems Proprietary (See Copyright Notice on Page 2)
68
appearance is not shared. Leaving this entry blank indicates the
default value of “c=r;p=s”
Disabled LED pattern when the Call Appearance is disabled (not available
for any incoming or outgoing call). Leaving this entry blank
indicates the default value of “c=o”
LedScript
Register Failed LED pattern when the corresponding extension has failed to
register with the proxy server. Leaving this entry blank indicates
the default value of “c=a”
LedScript
Registering LED Pattern when the corresponding extension is trying to
register with the proxy server. Leaving this entry blank indicates
the default value of “c=r;p=s”
LedScript
Call Back Active Call Back operation is currently active on this call appearance LedScript
Supplementary Services
Enable or disable the corresponding supplementary services on the phone.
Parameter Name Description Type Default
Conference Enable/disable Three way conference service Bool Yes
Attn Transfer Enable/disable attended-call-transfer service Bool Yes
Blind Transfer Enable/disable blind-call-transfer service Bool Yes
Do Not Disturb Enable/disable do-not-disturb service Bool Yes
Block Anonymous
Call
Enable/disable block-anonymous-call service Bool Yes
Call Back Enable/disable call-back (a.k.a. repeating dialing) service Bool Yes
Block Caller ID Enable/disable blocking outbound Caller-ID service Bool Yes
Secure Call Enable/disable secure-call service Bool Yes
CFWD All Enable/disable call-forward-all service Bool Yes
CFWD On Busy Enable/disable call-forward-on-busy service Bool Yes
CFWD On No
Answer
Enable/disable call-forward-on-no-answer service Bool Yes
Ring Tone
Each entry defines a ring tone to be used on the phone, with an ID between 1 and 10. The ID can be
used in a DirEntry to indicate which ring tone to use when the corresponding caller calls.
Parameter Name Description Type Default
Ring 1 Ring tone script for Ring 1 RingScript n=Classic-1;w=3;c=1
Ring 2 Ring tone script for Ring 2 RingScript n=Classic-2;w=3;c=2
Ring 3 Ring tone script for Ring 3 RingScript n=Classic-3;w=3;c=3
Ring 4 Ring tone script for Ring 4 RingScript n=Classic-4;w=3;c=4
Ring 5 Ring tone script for Ring 5 RingScript n=Simple-1;w=2;c=1
Ring 6 Ring tone script for Ring 6 RingScript n=Simple-2;w=2;c=2
Ring 7 Ring tone script for Ring 7 RingScript n=Simple-3;w=2;c=3
Ring 8 Ring tone script for Ring 8 RingScript n=Simple-4;w=2;c=4
Ring 9 Ring tone script for Ring 9 RingScript n=Simple-5;w=2;c=5
Ring 10 Ring tone script for Ring 10 RingScript n=THx;w=4;c=7
To Next Page
Loading...
