EasyManua.ls Logo

Linksys SPA941 - Page 71

Linksys SPA941
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DRAFT
© 2003 - 2005 Linksys, a Division of Cisco Systems Proprietary (See Copyright Notice on Page 2)
71
regular outbound call. MOH is disabled if this parameter
is not specified (empty).
Message Waiting
Default Ring
Conference Bridge URL
SIP Settings
Parameter Name Description Type Default
SIP Port SIP message listening port and transmission port Port 5060
Ext SIP Port External port to substitute for the actual SIP port of the
unit in all outgoing SIP messages. If “0” is specified, no
SIP port substitution is performed.
Port 0
SIP 100REL Enable Enable the support or the 100rel SIP extension for
reliable transmission of provisional responses (18x) and
the use of PRACK requests.
Bool No
SIP Proxy-Require
Auth Resync-Reboot
SIP Remote-Party-ID
SIP Debug Option None, 1-line, full, exclude OPTIONS, exclude
REGISTER, exclude NOTIFY, …
Choice
Proxy and Registration
Parameter Name Description Type Default
Proxy SIP Proxy Server for all outbound requests FQDN
Use Outbound Proxy Enable the use of <Outbound Proxy>. If set to “no”,
<Outbound Proxy> and <Use OB Proxy in Dialog) is
ignored.
Bool No
Outbound Proxy SIP Outbound Proxy Server where all outbound requests
are sent as the first hop.
FQDN No
Use OB Proxy In Dialog Whether to forcer SIP requests to be sent to the
outbound proxy within a dialog. Ignored if <Use
Outbound Proxy> is “no” or <Outbound Proxy> is empty
Bool Yes
Register Enable periodic registration with the <Proxy>. This
parameter is ignored if <Proxy> is not specified.
Bool Yes
Make Call Without Reg Allow making outbound calls without successful
(dynamic) registration by the unit. If “No”, dial tone will
not play unless registration is successful
Bool No
Ans Call Without Reg Allow answering inbound calls without successful
(dynamic) registration by the unit
Bool No
Register Expires
1
Expires value in sec in a REGISTER request. SPA will
periodically renew registration shortly before the current
registration expired. This parameter is ignored if
<Register> is “no”. Range: 0 – (2
31
– 1) sec
Time0 3600
Use DNS SRV Whether to use DNS SRV lookup for Proxy and
Outbound Proxy
Bool No

Table of Contents

Other manuals for Linksys SPA941

Related product manuals