6
Chapter 2: Getting to Know the PTZ Internet Camera
Camera LCD Screen and Built-in Microphone
Wireless-G PTZ Internet Camera with Audio
Chapter 2: Getting to Know the PTZ Internet Camera
Camera LCD Screen and Built-in Microphone
The Camera has a LCD screen that indicates the Camera’s current IP address and whether it is a fixed or dynamic
address. If the Camera uses a fixed IP address, then the screen will display the word “FIXED.” If the Camera uses
a dynamic IP address, then the screen will display the word “DHCP.”
The built-in microphone is located approximately one inch below the LCD screen, in the middle of the Camera’s
front panel. It has a range of approximately 9 feet (3 meters), depending on environmental conditions.
Camera LEDs
The Camera has four LEDs to let you know how the Camera is functioning.
POWER Amber. The POWER LED lights up when the Camera is powered on. It flashes for about 10-15
seconds while the Camera is initializing.
ACTIVITY Green. The ACTIVITY LED flashes when there is activity.
ETHERNET Green. The ETHERNETLED lights up when there is a connection to a wired network. It flashes
when data is transmitted to or received from the wired network.
WIRELESS Green. The WIRELESS LED lights up when there is a connection to a wireless network. It
flashes when data is transmitted to or received from the wireless network.
Figure 2-1: Camera LEDS, LCD Screen and
Built-in Microphone
Built-in
Microphone
To Next Page
Loading...