17
Chapter 4: Setting up and Mounting the Wireless-G Internet Camera
Setup Wizard
Wireless-G PTZ Internet Camera with Audio
Review your settings before the Setup Wizard starts to copy your files. Click the Next button to continue.
15. If you want to save the new settings, click the OK button. If you want to cancel your changes, click the Cancel
button.
16. After the files have been successfully copied, the Congratulations screen will appear.
• Install Viewer & Recorder Utility. Click this button to install the Camera’s Utility on your PC.
• Setup SoloLink DDNS Service. Click the Setup SoloLink DDNS Service button to set up and configure
the Linksys Dynamic Domain Name System (DDNS) service.
• Exit. Click the Exit button if you want to install the Camera’s Utility later.
Continue to the “Placement Options” section.
Figure 4-15: Review New Settings Screen
Figure 4-17: Congratulations Screen
Figure 4-16: Confirmation Screen
To Next Page
Loading...