Linksys WVC200 - Figure 6-4: Check Connections Screen; Figure 6-5: Cameras Found Screen

32
Chapter 6: Setting up the Linksys SoloLinktm DDNS Service
Setup Wizard for the SoloLink DDNS Service
Wireless-G PTZ Internet Camera with Audio
4. Make sure your network has an active Internet connection. Verify that your PC and Camera are connected to
the network and the Camera is configured properly. Click Next.
5. A list of Wireless-G Internet Cameras on your network and their status information is displayed next. In the
Selection box, click the name of the Camera you are currently setting up. Then, click the Next button.
Figure 6-4: Check Connections Screen
Figure 6-5: Cameras Found Screen