Linksys WVC200 - Figure 6-11: Confirmation of New Settings Screen; Figure 6-12: Select a Location ID Screen

35
Chapter 6: Setting up the Linksys SoloLinktm DDNS Service
Setup Wizard for the SoloLink DDNS Service
Wireless-G PTZ Internet Camera with Audio
11. Review your information on the Confirmation screen. If the new settings are correct, click Continue.
12. On the Select a Location ID screen, enter a Location ID, which can be a name describing your network’s
location. It will be combined with the Camera’s Device Name and ourlinksys.com to create a convenient URL
you can use to access the Camera. Click Continue.
Figure 6-12: Select a Location ID Screen
Figure 6-11: Confirmation of New Settings Screen