55
Chapter 7: Using the Wireless-G Internet Camera’s Web-based Utility
Setup
Wireless-G PTZ Internet Camera with Audio
Status
The Status screen allows you to view the Camera’s status information and log.
System
Firmware Version. The version of the current firmware installed.
MAC Address. The MAC Address of the Camera is displayed here.
Camera Name. The name you gave to the Camera is displayed here.
Description. Information about the Camera, such as location, is displayed here.
Date/Time. The current date and time are shown here.
Image
Image Type. This displays the compression type of the video stream.
Resolution. This displays the image size of the video stream.
Image Quality. This displays the image quality of the video stream.
Network
Network Type. The wireless network’s mode is shown here.
IP Address. The Camera’s IP Address is displayed here.
Subnet Mask. The Camera’s Subnet Mask is shown here.
Gateway. The Camera’s Gateway address is displayed here.
Wireless
SSID. The wireless network’s SSID or name is shown here.
Channel. The wireless network’s channel setting is displayed here.
Security. The wireless network’s encryption level is shown here.
Figure 7-15: Status Screen
To Next Page
Loading...