Linksys WVC200 - Figure 5-9: Set Preset Position Screen

24
Chapter 5: Installing and Using the Internet Camera Viewer & Recorder Utility
Using the Viewer & Recorder Utility
Wireless-G PTZ Internet Camera with Audio
Setting Presets
Preset camera positions can have various uses, in addition to being a part of the Patrol function. To preset camera
positions, do the following:
1. Click the Set Preset Position button on the View Video page to set the position.
2. Position the camera with the Positioning buttons.
3. You see the Set Preset Position screen, select the Preset Number, enter a Preset Name, then click the
Add button.
4. Click the Apply button when finished or the Cancel button if you decide not to set the Preset Position.
Figure 5-9: Set Preset Position Screen