18
Chapter 4: Setting up and Mounting the Wireless-G Internet Camera
Placement Options
Wireless-G PTZ Internet Camera with Audio
Placement Options
There are two ways to place the Camera. The first way is to place the Camera horizontally on a surface using the
included stand. The second way is to mount the camera on a wall using an optional wall mount stand.
Stand Option
1. The Camera includes a Camera Desktop Stand. Insert the bottom end of the camera into the Stand.
2. Place the Camera, and adjust its aim accordingly.
Wall Mount Option
The Camera has a standard camera mount that allows you to attach it to an optional wall mount stand (not
included).
1. Determine where you want to mount the Camera. Attach the wall mount stand to the wall.
2. Attach the camera to the wall mount.
3. Adjust the Camera’s aim and focus accordingly.
Proceed to the next section, “Audio Option.”
Audio Option
If you want to use your own microphone instead of the Camera’s built-in microphone, then follow these
instructions:
1. Connect the 2.5 mm input jack of your microphone to the Camera’s MIC IN port on its bottom panel. The built-
in microphone will automatically be disabled.
2. Place the external microphone in an appropriate location.
The installation of the Wireless-G Internet Camera is complete. Go to “Chapter 6: Installing the
Wireless-G Internet Camera Viewer & Recorder Utility.”
If advanced users wish to access the Camera through its Web-based Utility, then proceed to “Chapter 8:
Using the Wireless-G Internet Camera Web-based Utility.”
Figure 4-18: Stand Option
Figure 4-19: Camera
Desktop Stand
To Next Page
Loading...