What does 'FUNCTION ABORTED' mean on Lippert Components Lifting Systems touch panel?
If the Lippert Components Lifting Systems touch panel displays 'FUNCTION ABORTED', it means the user has aborted an automatic leveling sequence. Hit OK and restart the sequence.
What does 'EXTERNAL SENSOR' mean on Lippert Components Lifting Systems touch panel?
If the Lippert Components Lifting Systems touch panel displays 'EXTERNAL SENSOR', it indicates a bad connection or wiring. Replace or repair the connection to the rear remote sensor.
What does blinking red LED mean on Lippert Components ground control 3.0?
If the Lippert Components Lifting Systems Red/Green LED Indicator is blinking red, there is an error. Consult the Troubleshooting section of this manual to clear the error.
What causes 'HALL POWER SHORT' in Lippert Components ground control 3.0 Lifting Systems?
If you encounter 'HALL POWER SHORT' on your Lippert Components Lifting Systems, this indicates a short circuit detected on one or more of the jack hall effect power lines. You should check the harness and replace or repair it.
General| Brand | Lippert Components |
|---|---|
| Model | ground control 3.0 |
| Category | Lifting Systems |
| Language | English |
To Next Page
