Lippert Components PSX2 User Manual

Rev:11.08.19 Page 21 CCD-0001573-08
Bottom of Jack Motor Override:
Tools needed:
⁄
” drive ratchet and extension,
⁄
” socket
1. Find the port on the bottom of the jack motor (Fig. 9A).
2. Remove the rubber plug (Fig. 10A).
3. Insert the 5/16” socket into the port (Fig. 11).
4. Turn override until the jack extends or retracts to desired position.
Fig. 11
Fig. 7
A
Fig. 8
Fig. 6
A
Fig. 10
A
Fig. 9
A
Top of Jack Motor Override:
Tools needed:
⁄
” drive ratchet and extension (no socket)
1. Find the port on the top of the jack motor (Fig. 6A).
2. Remove the rubber plug (Fig. 7A).
3. Insert the
⁄
” drive into the port (Fig. 8).
4. Turn override until the jack extends or retracts to desired position.

Lippert Components PSX2 Specifications

General

Brand	Lippert Components
Model	PSX2
Category	Lifting Systems
Language	English