Lissmac CC401 E - Switching Machine On and Off

30/48
6.3. Switching the machine on and off
The main switch will be held in place if the unit is being supplied with power.
If the switch does not remain in the I/ON position, the power is not connected. This is a safety function!
The switch will automatically switch to the 0/OFF position in the event of a power failure to prevent the
machine from starting up unintentionally when the power supply is re-established.
In the event of unexpected machine reactions and in the event of an emergency, immediately activate the
EMERGENCY STOP switch.
Prerequisite
 CEE plug connected
with active power supply
 Emergency Stop unlocked
Switch on
1. Activate the parking brake
2. Main switch in the I/ON position
3. Selection switch in the Y position
5-10s
4. Wait until the motor has reached an
even speed (listen)
5. Selection switch to
EMERGENCY STOP
Selection switch
0
I
Main switch