34/48
6.7. Cutting with the saw blade guard open
Lacerations and ejected parts hazard
Severe injuries when coming into contact with the rotating saw blade or from ejected material when cutting
without the saw blade guard.
Keep the machine’s cutting area free
Never touch the rotating saw blade
Wear a safety helmet, work shoes and safety goggles
Stop the motor and wait for all parts to stop moving before working on the blade guard.
Procedure
The saw blade guard on the floor saw can be flipped up at the front. This function is required when free
cutting corners on a wall.
• Shut off the motor and wait for all parts to come to a stop
• Loosen the screws (Pos. 1) and flip the guard up
• Tighten the screw (Pos. 2) in the upper position if necessary
• Clear or cordon off the area
• Start the drive motor and cut
• Flip the tracking pointer up at the right time
After the cutting process
• Shut off the motor, activate the parking brake and wait for all parts to come to a stop
• Immediately close the guard and secure it with screws (Pos. 1).
1
2
To Next Page
Loading...
