44/48
The warranty for this machine is 12 months. For the wear parts listed below, the warranty is only valid for wear
that is not due to operation.
Wear parts are those parts that are subject to operational wear when the machine is used as intended. The
wear time cannot be defined in a uniform manner, it differs according to the usage intensity. Wear parts must
be maintained, adjusted and if necessary replaced in accordance with the manufacturer’s operating manual for
the specific device.
Warranty claims cannot be made based on operational wear.
Feed and drive elements such as racks, gear wheels, pinions, spindles, spindle nuts, spindle bearings,
ropes, chains, chain wheels, belts
Seals, cables, hoses, collars, plugs, couplings and switches for pneumatics, hydraulics, water,
electricity, fuel
Guide elements such as guide bars, guide bushes, guide rails, rollers, bearings, slide protection supports
Clamping elements in fast separating systems
Slide and roller bearings, which do not run in the oil bath
Shaft seals and sealing elements
Friction and overload couplings, brake devices
Carbon brushes, collectors
Quick-release rings
Control potentiometers and manual switch elements
Fuses and lights
Auxiliary and operating materials
Fastening elements such as wall plugs, anchors and screws
Bowden cables
Lamellas
Diaphragms
Sealing brushes, sealing rubber, spray protection rag
Filter of all types
Drive and return rollers and bandages
Running and drive wheels
Water pumps
Boring, separation and cutting tools
Rubber scrapers
Needle felt protection
Energy stores
To Next Page
Loading...
