Lissmac CC401 E - Page 45

45/48
Translation of Original EC declaration of conformity
This EC declaration of conformity applies to the following machine:
LISSMAC COMPACTCUT 401 E floor saw.
This declaration only refers to the machine in the condition in which it was sold; parts retrofitted
by the end user and / or retrospective intervention is not covered by this declaration. It is confirmed
that the machine corresponds to the relevant regulations of the guideline 2006/42/EG and
2000/14/EG.
Manufacturer:
LISSMAC Maschinenbau GmbH
Lanzstrasse 4
D-88410 Bad Wurzach
The technical documentation is archived by
LISSMAC Maschinenbau GmbH, D-88410 Bad Wurzach, Germany
Documentation Officer Head of design / technical documentation
Machine description:
The floor saw is solely intended for wet cutting joints in concrete or asphalt with a diamond-
tipped tool.
COMPACTCUT 401 E
Max. cutting depth 320 mm
max. saw blade 800 mm
Saw blade arbor 25.4 mm
Drive motor 400 V / 14.1 A
Power (kW/HP) 7.5 kW
Nominal speed (L/W/H) 1400 1/min
Weight 156 kg
Harmonized standards:
EN 13862:2010-03
EN ISO 12100:2011-03
EN 60204-1; VDE 0113-1/A1:2009-10
Legally binding
representative:
LISSMAC Maschinenbau GmbH
Lanzstrasse 4
88410 Bad Wurzach
Tel.: +49 (0) 7564 / 307 - 0
Fax: +49 (0) 7564 / 307 - 500
Email: lissmac@lissmac.com
www.lissmac.com
Bad Wurzach 3/4/2019
…………………………….. ……………………………..
ppa. Benjamin Mayer on behalf of Holger Sandt
(Technical Manager) (Head of Prduct Management CT)