LNS Alpha 538 - Declaration of Conformity

CHAPTER 1: BASIC NOTIONS 1-4
ALPHA 538/552
3. DECLARATION OF COMPLIANCE
EC DECLARATION OF CONFORMITY
According to annex II A of the directive 2006/42/EC
We declare that the following machinery complies with the next directives :
- Machinery Directive: 2006/42/EC
- Low Voltage Directive: 2006/95/EC
- EMC Directive: 2004/108/EC
Manufacturer : LNS SA
Route de Frinvillier
CH- 2534 Orvin
Suisse
Compiling relevant technical information : Plaseco Kurt De Pauw
Chemin des Petits-Clos 12
CH- 1744 Chénens
Suisse
Description of the machine : BAR FEEDER
Type : ALPHA 552
Serial number : N/A
The following essential requirements of the machine directive 2006/42/EC are applied and fulfilled : 1.1.2,
1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.5, 1.3.6, 1.3.7, 1.3.8,
1.3.9, 1.4.1, 1.4.2, 1.4.3, 1.5.1, 1.5.3, 1.5.4, 1.5.8, 1.5.9, 1.6.2, 1.6.3, 1.7.1, 1.7.2, 1.7.3, 1.7.4.
The following transposed harmonized standards have been used :
- Concerning the Machinery Directive :
· EN 14121 - 1 & 2:2007 : Safety of machinery – Risk assessment,
· EN 12100 - 1 & 2:2004 : Safety of machinery – Basic concepts & principles,
· EN 13857:2008 : Safety of machinery – Safety distances to prevent hazard
zones being reached by upper and lower limbs,
· EN 13850:2006 : Safety of machinery – Emergency stop equipment,
· EN 14120:2009 : Safety of machinery – Conception of movable guards,
· EN 13849-1:2007 : Safety of machinery – Safety related parts of control systems,
· EN 14118:2000 : Safety of machinery – Prevention of unexpected start-up,
· ISO 13855:2008 : Safety of machinery ― Positioning of protective equipment with
respect to the approach speeds of parts of the human body
· EN 60204-1:2005 : Safety of machinery – Electrical equipment of machines,
· EN ISO 4414:2011 : Pneumatic Power – Rules and Safety requirements,
· CEI 60812:2006 : Safety of machinery – FMECA Analysis,
- Concerning the Low Voltage Directive :
· IEC 60439-1/3 : Low-voltage switchgear and control gear assemblies
- Concerning the EMC Directive :
· EN 61000-6-4 : Generic emissions standard, Industrial environment
· EN 61000-6-2 : Generic immunity standard, Industrial environment
Place and date : Seal and signature :
Orvin, the 4
h
December 2012 Mrs. Nadia Pellaton
Manager Export department