3.4 Deleting an Access Code (Continued)
SECTION 3.4
Once you have selected the Access Code you want to delete,
Lockly will ask you to confirm deletion by showing you the Access
Code you are deleting, in this example, 1 3 5 7 9 0.
Press to delete, or to cancel.
There are two incidents where your Access Code cannot be deleted.
NOTE:
Only one Active Access CodeNo Access Codes Set
There are no Access Codes
set. The factory default Access
Code cannot be deleted.
There is only one (1) Access Code saved in the smart lock.
At least one code must be registered. Please add another
Access Code before attempting to delete the existing
code.
14
To Next Page
Loading...
Need help?
General
