3.9 Deleting Stored Fingerprints*
SECTION 3.9
While in Programming Mode, select
“2DE” to delete a Fingerprint. If you
are not in Programming Mode, please
see Section 3.2 to enter Program-
ming Mode.
After pressing “2DE” to delete, press
“FP” to delete a fingerprint.
Your registered fingerprint numbers
will be displayed on the screen. Tap
number to rotate to the next regis-
tered fingerprint. When you have
found the fingerprint ID you want
to delete, press and hold the OK
button for 3 seconds to delete.
(Example shown - “02”)
You will then see a confirmation
page displaying and with the
fingerprint number you are deleting
displayed in the lower left. Select Y
to delete or N to cancel.
Alternatively, while on Programming
Mode, select 2DE, then press FP and
place the registered fingerprint you
want to delete on the fingerprint
sensor. Your smart lock will identify
the fingerprint and jump to confir-
mation
page displaying Y and N.
Select Y to delete or N to cancel.
OK Button
Fingerprint ID Number
21
*Only works when lock is not paired with a smart phone device. If paired to a device please delete
your fingerprints from the administrative device paired to your lock.
To Next Page
Loading...
Need help?
General
