2.6 Rebooting Your Lock
SECTION 2.6
NOTICE
Reboot Lockly
in case of dead battery or malfunction. No
settings will be changed and all Access Codes will still be
stored within Lockly.
Press and release the reboot button when you want to reboot the lock. Your Lockly will beep once
after reboot. Only reboot when necessary.
To reboot, find the reboot button located on the bottom of the exterior side of Lockly lock. The
reboot button is located in the middle of the two 9V battery backup sockets.
You will need something small such as a paperclip, to press the reboot button. Insert the paperclip
and press down firmly and let go. Your screen should restart and the lock should reboot automatically.
Reboot Button
6
To Next Page
Loading...
Need help?
General
