Option 1 - Entering Correct Access Code
Activate the keypad by pressing and holding for 3 seconds.
Enter the correct Access Code twice (2) when the keypad is available, pressing after every
time the Access Code is entered.
Option 2 - Lockly
Bluetooth App
Use the app that is synced to your Lockly
to disable Safe Mode by unlocking the door. If you have
not downloaded the app to use with your smart lock, you won’t be able to use this option to disable
Safe Mode.
Option 3 - Physical Key
There is a pair of keys supplied with your new lock. You may use the keys to manually unlock the
door and disable Safe Mode. To learn how to use your physical keys, see Section 4.4.
Option 4 - Registered Fingerprint
Use any registered fingerprint to reactivate the keypad. The door will unlock and reactivate the
keypad once a registered fingerprint is used.
4.7 Disabling Safe Mode
29SECTION 4.7
There are four (4) ways to disable Safe Mode.
To Next Page
Loading...
Need help?
General
