Lockly SECURE User Manual

4.1 Locking/Unlocking Lockly™ with Access Codes
SECTION 4.1
Lockly™ Secure can be unlocked using 1 of 4 ways - via your stored Access Code, registered
fingerprint (Secure Plus / Pro only), smartphone with Bluetooth, or with the physical key
supplied with your lock.
OK Button
Three consecutive wrong attempts will put Lockly™ in “Safe Mode”. (See Section 4.5)
Lock your Lockly™ Secure by pressing the OK Button anytime when the door is closed.
Lockly™ Secure will also auto-lock after five (5) seconds after unlocking and opening.
Slide your hand across the screen to activate the
keypad.
Enter your 6 to 8 digit Access Code followed by
the OK button. Press OK anytime to reset if you
entered the wrong digit.
If the Access Code entered is correct, the door will
unlock. If the Access Code entered is incorrect,
Lockly™ will beep twice.
Hold OK Button (3 sec)
You may toggle between two types of keypad displays to
enter your Access Code. The fixed digit version and
the PIN Genie
TM
version (Recommended). Press and
hold the OK Button for 3 seconds to toggle back and
forth between the two keypads.
PIN Genie
TM
Fixed Digit
23

Lockly SECURE Specifications

General

Power Source	Battery
Compatibility	Standard doors
Operating Temperature	-4°F to 140°F (-20°C to 60°C)
Keyless Entry	Yes
Access Methods	Fingerprint, Keypad, Physical Key, Mobile App
Fingerprint Capacity	99 fingerprints
Connectivity	Bluetooth, Wi-Fi
Battery Life	Up to 1 year (depending on usage)
Keypad	Yes
Voice Control	Yes (Amazon Alexa, Google Assistant)
Door Thickness	1.375 to 2 inches
Battery Type	4 AA batteries
Mobile App	Lockly App
Auto-Lock	Yes
Weather Resistance	Yes
Installation	DIY
Lock Type	Smart Deadbolt
Material	Zinc Alloy