Lockly SECURE User Manual

2.4 Factory Reset
SECTION 2.4
In order to restore the Lockly™ to factory default settings, you must have your “Initial Code”
available. The Initial Code can be found on the Initical Code Card that came with your smart
lock. (Was n the Quick Start Guide)
After you have the Initial Code ready, push the reset button on the back panel of the Lockly™
to perform your reset. See below to see which Reset Process applies for you. Once the smart
lock has been reset, all the data previously stored will be deleted.
2.5 Keypad Display Switch
The exterior keypad screen can be locked and
turned off by using the ON/OFF switch at the back
panel (interior) of the smart lock. When it is
switched off, people who are outside cannot enter
any access codes to unlock the door.
Reset Button
If Paired with App If Never Paired
Press Reset Button
for one (1) second
Open the Lockly™
smartphone app to
add your lock using
the Initial Code
Press Reset Button
for three (3) seconds
5

Lockly SECURE Specifications

General

Power Source	Battery
Compatibility	Standard doors
Operating Temperature	-4°F to 140°F (-20°C to 60°C)
Keyless Entry	Yes
Access Methods	Fingerprint, Keypad, Physical Key, Mobile App
Fingerprint Capacity	99 fingerprints
Connectivity	Bluetooth, Wi-Fi
Battery Life	Up to 1 year (depending on usage)
Keypad	Yes
Voice Control	Yes (Amazon Alexa, Google Assistant)
Door Thickness	1.375 to 2 inches
Battery Type	4 AA batteries
Mobile App	Lockly App
Auto-Lock	Yes
Weather Resistance	Yes
Installation	DIY
Lock Type	Smart Deadbolt
Material	Zinc Alloy