- 38
english
Explanations of the symbols for sound identification/display:
Transmitted audio signal:
Mono audio transmission analogue
Two-sound transmission (Sound1/Sound2) analogue
1+1 Two-sound transmission (Sound1/Sound2) digital
Stereo sound transmission analogue
Stereo sound transmission digital (PCM)
Dolby Digital sound transmission (DD)
dts sound transmission
MPEG sound transmission
Dolby Pro Logic II sound transmission
Dolby Virtual Speaker Reference display
Dolby Virtual Speaker Wide display
Transmitted audio channels:
DD / dts 1.0 / mono
DD / dts / MPEG 2.0
DD / dts 3.0
DD / dts 4.0
DD / dts 5.0
DD / dts 2.1
DD / dts 3.1
DD / dts 4.1
DD / dts 5.1
Status display
➠ In normal TV mode, without other displays.
INFO: Show status display.
In the upper two lines, you will see the number and name
of the station, the title and transmission time of the
programme currently showing (if available) and the sound
identification signal.
The bar (if available) indicates the progress of the current
programme.
If information about the current programme is available,
this can be called by pressing the INFO button again; in
this case the button on the right is displayed.
A menu (see page 39), the time and, if activated, the alarm
time and switch-off time appear at the bottom of the
screen depending on the DVB station.
The status bar is also shown automatically every time you
change channels.
The status bar is hidden automatically at the end of the
display time (see page 54 for setting).
If you want to hide the status bar manually before the dis-
play time ends, you can only do this with the END button.
TEXT
Daily operation
To Next Page
Loading...
Need help?
General
