- 74
english
Connecting a DVD player to the TV set
➠ A DVD player has been selected in the TV Menu under Connections
AV connecting settings Device at connection AV (see also page 72).
Switch off all equipment before connecting.
Connect the Euro-AV output of the DVD player to the AV socket of the
TV set.
Use a fully equipped Euro-AV cable (available from your dealer) for this.
Playback from AV device
If the device at AV supports the Digital Link Plus functionality or if in the
TV menu Connections AV connecting settings Allow switching
voltage yes, the TV set will automatically switch to the corresponding
AV input after starting the replay at the AV device.
The AV input can also be called manually, however.
Call AV selection.
Select AV,
OK switch over.
Start playback on the connected device.
Devices to the connections AV/AVS
An additional appliance such as a DVD player, VCR/DVD recorder etc.
can be connected to the TV set at the Euro-AV socket AV (see page 11).
The AV input AVS (see page 11) offers the possibility of connecting a digital
camera or a Camcorder for example.
The AV sockets can process different signal types. Which signal type your
accessory device provides can be found in the operating manual of the
appropriate device.
Owing to the large number of AV devices available on the market, we can
only mention a few examples for the connection of accessory equipment
to the AV sockets here.
If the sound of the device connected to an AV socket is to be transmit-
ted digitally, a cinch cable must be plugged between the coaxial digital
output of the accessory equipment and the AUDIO DIGITAL IN socket of
the TV set. In addition, the digital audio input must be assigned to the
appropriate AV socket.
The digital audio input can be assigned to the appropriate AV socket by
the TV menu Connections Miscellaneous Assign digital audio input
(see page 81).
Remote TV switch on via Digital Link
You can select whether the TV set is to switch on automatically from
Standby mode if a disc is played or a screen menu displayed on a Digital
Link Plus-enabled device connected to AV.
You can find the settings in the TV Menu under Connections Other
Remote TV switch on via Digital Link (see also page 73).
OK
HDMI2
HDMI1
PC IN
AVS
AV
VIDEO
AV SELECTION
Switch to ...
External devices
Connection example of a DVD player
AV
TV set
DVD player
AV
To Next Page
Loading...
Need help?
General
