- 44
english
Picture in Picture (PIP)
The concurrent display of two different images is referred to as Picture
in Picture.
A green frame around the PIP picture indicates that the station selection
affects the PIP picture. A white frame means that the operation refers
to the main picture. If the frame is blue, the station play is active in the
PIP picture.
Restrictions for the PIP mode:
➠ The selection and combination options for main screen/PIP screen
basically depend on the number of receivers (tuners) of the TV set
(see Equipment variants on page 97):
➠ PIP operation is initially limited to AV-PIP (one station and one AV
source). If a satellite tuner is retrofitted, PIP operation from digital
satellite picture and picture via antenna/cable (analogue) is addition-
ally possible.
➠ Picture change and station selection is restricted during recording.
Your TV set distinguishes between two PIP displays:
Split screen In this case the screen is divided in the middle and the
additonal PIP image is shown on the right side of the
screen. Both images are compressed horizontally and
each gets half of the screen.
Small PIP In this case a small PIP image is inserted in the TV picture.
Starting and ending PIP mode
Show/hide PIP.
Select the PIP picture
➠ The frame is green,
if not, press the green button.
Select the station as usual.
Select the station for the main picture
➠ The frame is white,
if not, press the green button.
Select the station as usual.
Function of the coloured buttons
➠ The frame is green,
if not, press the green button.
Red button: Freeze picture in PIP on / off.
Yellow button: Switches contents of TV picture and PIP
picture.
Blue button: Start/stop PIP scan in the PIP picture.
17.00-18.30 Flora & Fauna
Picture in Picture
To Next Page
Loading...
Need help?
General
