14
PREFACE
Every attempt has been made to present within this service manual, accurate and up to date technical information. However, development on the Lombardini series is
continuos. Therefore, the information within this manual is subject to change without notice and without obligation.
The information contained within this service manual is the sole property of Lombardini. As such, no reproduction or replication in whole or part is allowed without the
express written permission of Lombardini.
Information presented within this manual assumes the following:
1 - The person or persons performing service work on Lombardini series engines is properly trained and equipped to safely and professionally perform the subject
operation;
2 - The person or persons performing service work on Lombardini series engines possesses adequate hand and Lombardini special tools to safely and professionally
perform the subject service operation;
3 - The person or persons performing service work on Lombardini series engines has read the pertinent information regarding the subject service operations and fully
understands the operation at hand.
GENERAL SERVICE MANUAL NOTES:
1- Use only genuine Lombardini repair parts. Failure to use genuine Lombardini parts could result in sub-standard performance and low longevity.
2- All data presented are in metric format. That is, dimensions are presented in millimeters (mm), torque is presented in Newton-meters (Nm), weight is presented in
kilograms (Kg), volume is presented in liters or cubic centimeters (cc) and pressure is presented in barometric units (bar).
To Next Page
Loading...
Need help?
General
