- 19 -
FOCS Workshop Manual_cod. 1.5302.351_7° ed_ rev. 06
LDW 1204
LDW 1204/T
2
Technical information
N (DIN 70020) Automotive rating, intermittent operation with variable speed and variable load.
NB (DIN 6270) Rating with no overload capability, continuous light duty operation with constant speed and variable load.
NA (DIN 6270) Continuous rating with overload capability, continuous heavy duty with constant speed and constant load.
C (NB) : Specific fuel consumption at NB power
Mt : Torque at N.
a : Range of application for continuous operation. In case of application outside this range please contact LOMBARDINI.
The above power values refer to an engine fitted with air cleaner and standard muffler, after testing and at the
environmental conditions of 20°C and 1 bar. Max. power tolerance is 5%. Power decreases by approximately 1% every
100 m di altitude and by 2% every 5°C above 25°C.
Note: Consult LOMBARDINI for power, torque curves and specific consumptions at rates differing from those given above.
Important
Non-approval by Lombardini for any modifications releases the company from any damages incurred by the
engine.